Hotline: +84 902 868 185 (Sales1)

Specialized News

How To Make A Plastic Flower Pot Looks Like A Concrete Pot[01/10/2014]


Light weight Concrete Pot What looks like a cast concrete planter or stone planter is really just a plastic flower pot painted to resemble something much more hefty and pricey. A planter like this one will look 
great in a staged home, either indoors or out, holding real plants or silks.

Take one cheap plastic flower pot and turn it into a classic cement planter. Magic? No, it's just paint, and you can do it yourself, even if you've never done faux finishes before. Don't let the French word scare you.

Here's my Step-by-Step for creating the flower pot pictured above. It's a quick and easy DIY project.

1. Gather materials. Doing this project outside is best. The paint will dry more quickly with better air circulation, and you'll have fewer surfaces to protect. However, if it's above 70 degrees, find a shady place or wait for a cooler time because the paint can dry too fast. Here's what you need.

  • Work surface and drop cloth.
  • Plastic or resin flower pot, preferably one with a thick top edge.
  • Gloves.
  • Two rags.
  • Medium grade sandpaper.
  • Paint stick to stir paint.
  • Paint brush, not an expensive one.
  • Plastic bucket, 1-quart to 1-gallon.
  • Screwdriver or painter's 5-in-1 tool.
  • Latex primer like Zinser or Kilz.
  • Natural sponge.
  • Cardboard, or 3 disposable paper or foam plates, or pieces of aluminum foil.
  • Three latex semi gloss or satin housepaints or craft paints (medium or light grey, white, and black).
  • Optional: clear sealer (either spray paint or liquid).

2. Prepare the containerCover your work surface with a dropcloth to protect it. Using a dry rag, wipe the container to remove any loose dirt, including the inside. Put on your gloves. Sand the container's outside surface.


Fiberstone Pots 

Sanding will give the surface "tooth" to help paint adhere better. As you can see, I am recycling an old container. The container you faux finish needn't be new, but it needs to be clean.

3. Paint with primer. Invert the planter and start at the bottom. Brush on paint. It will dry quickly, especially if you are working outside and it is warm or windy. 


Pottery Vietnam 

  If the planter has feet, paint all sides to be sure none of the old color shows when you are done.


Cement planter 

Paint the bottom half, and the underside of the top lip before you set the planter right side up.


Pottery Vietnam 

Next, paint the sides with the planter in an upright position. Use your gloved hands to 

rotate the box from the top lip.


Fiberstone Pots 

 Paint inside the top edge, which will be visible even after the planter is filled.


Vietnam Pottery 

 Your primed planter will look like this. Don't worry about coverage. You're just making sure the next coat sticks. Check for drips and runs before the prime coat dries.

4. Apply a base coat of grey paintFollow the same steps as the prime coat, starting at the bottom when the planter is inverted.

Fiberstone Pots


Your planter should look something like this when it has an even coat of grey as a background.  


5. Sponge on white paint. Dampen the sponge. Pour a small amount of white paint into the plastic bucket. Add an equal amount of water and stir. For my planter, which measured 15 inches tall, I used less than 1/4 cup of white paint for sponging. Dab the sponge into the paint and then dab most of the paint off onto a piece of cardboard, disposable plate, or aluminum foil. Practice on the interior of the planter until you get the feel of sponging to simulate texture. 


Pottery Vietnam 

  Lightly dab paint onto surface, moving the sponge around to create a random pattern. I used a piece of aluminum foil to remove excess paint from the sponge.


Pottery Vietnam 

Overlap the sponging pattern, and leave some areas grey.

6. Apply black wash. After the entire surface is randomly sponged with white, wash your sponge well and put it away. Wash the plastic bucket, and use it to mix a small amount of black paint with an equal amount of water, about the same amount as you mixed of white paint.  Brush the entire painted surface with the diluted black paint. It should settle into any groves and crevices. Lightly wipe the surface to remove most of the black wash. It should give the planter a slightly aged look.      


Cement planter  Have a rag ready to wipe off the diluted black paint.

Cement planter

 The wash will look like this when you brush it on. 

Don't worry about coverage, but make sure black paint gets into crevices. 


Cement planter

After the black wash is wiped off, your planter will have a softer look.  The paint should dry quickly.


7. Add splatterThis can get messy, so protect any adjacent surfaces. Using the same black wash, load your brush with it, and then remove most of the paint. Rap the brush sharply against a screwdriver or 5-in-1 tool to make a splatter pattern of black paint on the planter. Rotate the planter to do all sides, including inside the top edge. You may choose to position the planter on a cardboard box and walk around it rather than rotate it. Aim for a random but all-over splatter pattern. If some drops are too large or look more like streaks than dots, use a rag to dab them away while they are still wet.


Light weight Concrete Pot 

Practice your splattering technique on the inside of the planter before you do the outside. 

Keep the brush at least a foot away from the surface. 


Light weight Concrete Pot 

Your planter should look evenly splattered when you are done. You can do a lot of

splattering or a little. I can imagine two of these, each with a topiary on either side of a front door.


Light weight Concrete Pot 

It's optional to cover your work with a coat of clear sealer. It can give the paint an extra layer of protection if used outside, and it can add a subtle sheen to the finish. I sprayed a coat of clear satin finish on this planter to make it look more granite-like. 



Light weight Concrete Pot 

This is a resin pot that I faux finished with pinkish undertones. 

You can choose natural stone colors that work with the colors of your staged home.




See more: Buddha Of Healing, Gold Meditating Medicine Buddhist Concrete Statue, Cement Garden Figure


Hoang Pottery Company is as a professional manufacturer and exporter of handmade pottery from Vietnam.  we offer you a wide range of products: for outdoor use and indoor use, also furniture and garden decoration items for your garden such as ceramic, glazed terracotta, red terracotta, black terracotta, zinc, light cement, light terrazzo,....All our products are 100% hand made so they are frostproof in cold weather conditions and also our pottery lines for architecture applications such as refractory items are withstand with high heating.


Please feel free to shop our site and we will send you a catalog. Note that we have many styles not shown on the website so please inquire if you do not find the color and style you are looking for.


It's our great pleasure to welcome all the customers to contact, visit our factory, showroom for business negotiation.



  • 1970843 570634553034911 2052781103 n